OPERATION: The OCTAGONAL BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. The Octagonal Blender gives best result for granules due to very slow speed and octagon shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. In Octagonal Blender the granules comes from all sides due to the octagonal shape of the product container, hence requirement of RPM is less. Suitable mainly for Crystalline & Granular type material. This type of material gets sufficient continuous movement due to their shape if container have only slow movement and will results in good quality of blending / lubrication of granules.

OPERATION: The Double Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. CAPACITY: 10 kg., 25 kgs., 50 kgs., 100 kgs., 200 kgs., 300 kgs., 500 kgs.

OPERATION: The RIBBON BLENDER is an efficient and versatile blending machine for mixing of dry granules & powders homogeneously. Approximate two third of the volume of the container of Ribbon Blender is filled to ensure proper mixing. The Ribbon Blender gives best result for mixing of dry powder & granules due to the design and shape of the mixing ribbon and product container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. Material should be charge from the top side. There are port/ports should be provided on the top cover to charge the material as well as for air vent. One discharge valve provided at the bottom side at center of the container. The discharge height could be adjust as per the requirement, so that material gets discharge in the other container directly, so that material handling time for discharge is nil and the operation is dust free. In Ribbon Blender the powder moves from center to the end of container and end of container to the center of container. Hence requirement of total mixing time is very less and the RPM required are also very less. The dry material gets sufficient continuous movement due to the shape & movement of ribbon & shape of the container., which moves material for good quality of blending. The unit is consist of one electrical motor, one worm reduction gear, belt drive between motor and gear, couple drive between gear to ( ribbon ) mixing stirrer. Container having four nos. of legs with discharge valve & top cover. Both ends of mixing shafts is sealed with bush & PTFE gland housing & safety guards are provided on all moving parts

The \\\"V\\\" BLENDER is an efficient and versatile blending machine for mixing and lubrication process of dry powders homogeneously. Approximate two third of the volume of the Blender is filled to ensure proper mixing. The \\\"V\\\" Blender gives best result for powders due to suitable medium speed and \\\"V\\\" shape of container. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products etc. In \\\"V\\\" Blender the powders comes from all sides due to the \\\"V\\\" shape of the product container, hence requirement of RPM is medium. Suitable mainly for powder & granules type material. This type of material gets sufficient continuous movement. Due to the \\\"V\\\" shape of container, have only medium movement and will results in good quality of blending/lubrication of granules. It is formed by a cylindrical cut and welded at an angle carefully, calculated to result into a perfect “V” shape. Two trunnions welded to the blending body in its longitudinal balance line, are machined afterwards, so as to obtain a perfect alignment. The bottom end of the chamber posses a butterfly discharge valve. Feeding and cleaning are carried out through other two end of the machine which are fitted with tight closing lids. The working cap of such type of blender is 50% of its total volume. This type of blender is preferably employed for processing products of different density and particle size. In “V” Blender the product fed inside are processed by tumbling inside and sliding along and falling by gravity.

Silent Features: Hand wheel provided. Re-designed variable speed pulley. Separate centre pillar of Meehanite grade casting Turret of SG IRON 400/12 grade casting

TABLET DESIGN:- Using CAD / CAM Technology generated entirely new and exciting designs to A high quality profile. Tablet design and the clarity of a Logo/ Embossing Carried on the tablet face will reflect a Precise image for any Pharmaceutical Company. EURO AND IPT STANDARDS:- Hi-Tech working closely with EURO AND IPT STANDARDS. This provides Interchangeability of all "B" and "D" type tooling. SHAPED TOOLING: Special shaped tooling no matter how complex, is held to very fine tolerances Clearance and alignment of punch tip to key. STEEL: "PHARMACEUTICAL GRADE" STEEL -OHNS (T) and HCHC are using after a Variety of tests. The structure of the steel is clean free from impurities and non- Metallic inclusions ACCURACY, QUALITY AND FINISHING: Statistical process control from Prism guarantees tool control with the added Benefit of fast and efficient set up. QUALITY SERVICE: Hi Tech PHARMA MACHINERY provides service for tablet Design, Problem solving for tools and Guidance on tab letting problem GURANTEED DESPATCH: Prism believed in total commitment and confirmation of a agreed dispatch dates TYPES OF TOOLING TYPE PUNCH DIAMETER DIE DIAMETER DIE THICKNESS INCH MM INCH MM INCH MM VET 1.750 44.45 2.125 53.98 1.187 30.15 SLUG 1.250 31.75 2.000 50.80 0.938 23.83 D 1.000 25.40 1.500 38.10 0.938 23.83 DB 1.000 25.40 1.187 30.15 0.875 22.22 B 0.750 19.05 1.187 30.15 0.875 22.22 BB 0.750 19.05 0.945 24.00 0.875 22.22 VARITIES OF SHAPE :::::. VARITIES OF SHAPE