Hebei Xingtai Machinery Manufacture Co., Ltd. considering the feedback from customer that in the process of the material mechanism with a band saw, meet hardwood, frozen and nails wood, the general saw blade will be damaged in an hour.

Our company established a professional R&D group in order to producing this saw blade grinding machine, this machine is mainly for welding alloy on the original saw blade, enhancing the hardness of saw blade. And the welding alloy saw blade can use at least 2 days without changing a new saw blade, greatly saves labor and material resources, improve the production efficiency and low cost.

The machine designed on the basis of dynamics, in order to balance the density and pore of products. It is beyond the handmade both in taste and appearance. This machine control by the high quality microcomputer, which has the humanized control panel, can precise control this machine. You can familiar operate this machine in 5 minutes. This machine is highly automation, accurate quantity, made the products in the same size according to the standard of 20g flour and 150g filling.

This product is suitable for the construction site dust removal, factory dust removal, greening trees, taller plants insecticide spraying, and can also be applicable to the environmental protection industry, coal’s dust and other raw material yard, discharge outlet, docks, steel mills and other water-jet dust, dust suppression, cooling, and the public places or landfill drug spraying, etc. This product has many uses, it is not only fixed in one place, but also movable.

The use of pipe polishing machine: mainly used for hardware, electroplating, and vehicle accessories, metal or wood furniture, standard parts and other manufacturing industries.

1. Higher speed, higher efficiency! Our machine can straightening, rust removal and painting the 8 meters long tube in one minute, and complete in one-time processing. 2. High speed rotating 360 degree to clean the cement and rust comprehensively, make it more clean and smooth.

The product also has the following features: 1. The effective play of the motor power, high efficiency. 2. High absorption material, the actual pumping efficiency reached the theoretical value reached more than 80%, save the labor cost. 3. The device reliability 4. Long service life 5. The operation is simple 6. Oil supply adequate, lubrication effect is good, save consumption by more than 50%. 7. The buffer technology makes system reversing impact small, produce less heat.

This product is set by lifting mechanism and the parallel of vertical elevator guide rail on the guide rail bracket. The bracket of plaster board set in the front end of the plaster board, the upper of the plaster board’s working plane made into cant, the lower half made into the vertical plane, vibrator set on the other side of the plaster board, the feeding box set on the above of plaster board.

The band saw roller press machine is mainly used for rolling band saw blade, adjust the blade of the appropriate tension, so that the saw blade on the outer edge smoothly. The purpose is assured not occurring channeling change when the band saw operating. The band saw machine is an indispensable supporting auxiliary machinery. The machine adopts high-quality steel roller, after high-precision processing, high hardness, long life. The use of high-wear-resistant copper pieces of processing.

Our company considering the problem of fine stone concrete conveying during the floor heating construction, and designed and manufacture the small S tube valve type slurry pump - BS series of fine stone concrete pump, which successfully solved this problem. The product also has the following features: 1. Automatically compensate the wear, sealing is good. 2. Using high hard wear-resistant alloy materials, longer service life.

1. The automatic rebar bending machine with straightening function, variety functions provided. 2. This machine can processing variety size and shape of steel bars with the intelligent control. 3. Our machine can processing from the raw material to the stirrup products at one time, and can both cold working and hot working with the high strength wire rod steel. 4. High production efficiency, equal with 20-30 workers handwork.

1. The automatic steamed stuffed bun machine use the modified nose, automatically into double frequency conversion, more stable performance. 2. This machine can keeping the chewiness of flour and the texture of steamed bun, due to the advanced system of filling and flour. And whatever the stuffing is, the machine can make a perfect steamed bun due to the smooth uniform filling. 3. The machine designed on the basis of dynamics, in order to balance the density and pore of products.