Product Specification The inner and outer ring raceways are segments of cones and the rollers are also made with a taper so that the conical surfaces of the raceways and the roller axes if projected, would all meet at a common point on the main axis of the bearing.> This conical geometry is used as it gives a larger contact patch, which permits greater loads to be carried than with spherical (ball) bearings, while the geometry means that the tangential speeds of the surfaces of each of the ro

Product Specification A ball bearing is a type of rolling-element bearing that uses balls to maintain the separation between the bearing races. The purpose of a ball bearing is to reduce rotational friction and support radial and axial loads. It achieves this by using at least two races to contain the balls and transmit the loads through the balls. In most applications, one race is stationary and the other is attached to the rotating assembly (e.g., a hub or shaft). As one of the bearing race

Cylindrical roller bearings offer excellent resistance to instantaneous overloads and shocks. They simplify assembly thanks to their detachable elements and allow, for certain types, axial displacement or low axial load, for other types. Cages The standard cage for these bearings is the polyamide cage which allows bearing operating temperatures of 120°C or 248°F (150° or 302°F peak). The standard cage for series 4 is in pressed steel. The machined brass cage is available on option. Large-dime