Self-aligning ball bearing has 2 rows of balls and common concave sphere raceway in outer ring Bearing is consequently self-aligning and insensitive to angular misalignments of shaft relative to housing Suitable for applications where considerable shaft deflections or misalignment are to be expected Self-aligning ball bearing has lowest friction of all rolling bearings, which enables it to run cooler even at high speeds High speed and low noise High precision and long life

Spherical roller bearings are double row, self-retaining units comprising solid outer rings with a concave raceway, solid inner rings and barrel rollers with cages. The inner rings with cylindrical or tapered bores. Types EA, C, CD, CA, these are designed for high load capacity, are available. Types EA, C, and CD have pressed steel cages; and type CA has machined brass cages. Type EA has especially high load capacity, features low torque, and has a high-strength cage.

Pillow block bearings comprise the following series: Series UC200 (Inside diameter 13 100) Series HC200 (Inside diameter 13 100) Series UC300 (Inside diameter 20 140) Series UCX00 (Inside diameter 13 100) Series SB200 (Inside diameter 13 100) Series SA200 (Inside diameter 13 100) Series SER200 (Inside diameter 13 100) Series SC200 (Inside diameter 13 100) Series LR200 (Inside diameter 13 100) Series RCSM200 (Inside diameter 13 100)

Cylindrical roller bearings mostly consist of the cage, the rollers and guided by two capped edges on a ring. It is a separable bearing, convenient for it's assembly and disassembly especially it has the advantages in a condition that the interference is required and assorted with inner ring, outer ring and housing. The bearing of this type can normally take the radial load, on the other hand, single row cylindrical roller bearing with ribbed inner ring .

Tapered roller bearings mainly burden the joint load from radial and shaft side. This kind of bearings has strong load capability. It belongs to separated bearing; its inner components and outer components can be equipped individually.On small and medium sized dimensions, our tapered roller bearings use P5 or equivalent techniques; and adopt entire convexity design. Single-Row Tapered Roller Bearings Double-Row Tapered Roller Bearings Four-Row Tapered Roller Bearings

Deep groove ball bearings are versatile, self-retaining bearings with solid outer rings, inner rings and ball and cage assemblies. These products are of simple design, durable in operation and easy to maintain; they are available in single and double row designs and in open and sealed variants. Due to the production technology used, open bearings can still have turned recesses on the outer ring for seals or shields.