Hurshin plastic outrigger pads are manufactured to carry safe ground-bearing load when your mobile cranes are working in poor ground conditions. The pads come in two thicknesses: The 0.75-in.-thick pads have a crushing level of 2,000 psi, with a rated capacity of 100 tons, while the 1.5-in. pads have a crushing level of 2,500 psi and a rated capacity of 125 tons. The extremely durable outrigger pads can beat tough environments and have a much longer working life than pads made of wood.

Marine fender pad made of Polyethylene is a superior match to rubber fender for example arch fender, cell fender, cone fender, D fenders, element fender, square fender, V fender....as a protective cover for different docking constructions.They are widely applied in ports, harbors, docks, wharves, piers and they protect fenders from UV damage; The Polyethylene frontal pad is especially useful when low-friction contact during docking and mooring is needed.

Ultra-high molecular weight polyethylene is thermal forming engineering plastic that have better mechanical and thermal properties than the widespread used commodity plastics, Ultra-high molecular weight polyethylene is called UHMWPE for short. UHMWPE sheet made by Hurshin Plastics is: * Odorless, tasteless and nontoxic * Light in weight * Highly resistant to corrosive chemicals * Resistant to low temperature * self-lubricating * Waterproofing * Abrasive Certification met: ISO90

Ultra-high molecular weight polyethylene is thermal forming engineering plastic that have better mechanical and thermal properties than the widespread used commodity plastics, Ultra-high molecular weight polyethylene is called UHMWPE for short. UHMWPE sheet made by Hurshin Plastics is: * Odorless, tasteless and nontoxic * Light in weight * Highly resistant to corrosive chemicals * Resistant to low temperature * self-lubricating * Waterproofing * Abrasive Certification met: ISO

UHMWPE hopper liner features: * Nonstick * Quickening material flow speed * Super abrasive * Does not effect by low and high temperature * Reducing noise Product specifications: Length: 1000-3000mm Width: 1000-3000mm Thickness: 6-300mm Other specifications are also available upon your request Certification met: GB/T19001-2008 idt ISO9001:2008

* Light in weight * Resistant to corrosion * Non-stick * Quicken material flow speed and time saving * Super wearable, wear resistance is 6.6 times as carbon steel, 5.5 times as stainless steel, 27.3 times as Brass. * Excellent performance of lubricating, friction resistance, energy saving. * High impact resistance Certification met: GB/T19001-2008 idt ISO9001:2008