Fabric belt cover rubber is widely used in mine,power plant,coal,ports,metallurgy,chemical and other fields.Ramimtech fabric belt cover rubber is made by quality imported raw rubber and special formula, it has the features of high adhesion strength,high temperature resistant,Anti-aging,wear-resistant and so on.Fabric belt cover rubber is fit for the hot slicing joint of fabric belt.

Diamond repair Patch have two kinds of models standard repair patch and fabric-reinforced repair patch. The surface of repair patch have semi-cured design.With cold bonding cement, it can be firmly and perfectly spliced on the worn part of conveyor belt. Its operation is easy and won't take long time to repair.

　　Cold vulcanizing cement（cold curing glue）is a two-component cold curing glue.It is designed for bonding rubber and rubber，rubber and metal， rubber and fabric， fabric and fabric.With high adhesive strength and fire-resistant，Cold vulcanizing cement has become necessary adhesive for coal mine assembly line and been widely used in coal mines， power plants， cement plants.Suitable for pulley lagging and conveyor belt cold vulcanization joint.

Fabric conveyor belt repair band Fabric conveyor belt repair band is a special material for repairing damage in conveyor belt ,such as scratches and pierce which often occurred in the process of materials transportation. In order to avoid the damages area becoming more and more larger, and then causing the whole conveyor belt fracture and bring losses to personal safety and enterprises, the repair of fabric conveyor belt become an important daily work.

Belt Jointing Materials Tie Gum intermediate rubber uncured cushion rubberwas made based on special formula and technology to ensure the quality of conveyor belt jointing

conveyor belt part repair material? repair patches and cold vulcanization glue Sk313? repair patches apply diamond design? the special industrial design that has the characteristics of “ middle high? surroundings low”? thus can avoid secondly repair from sweeper. The back side of repair patch is designed by BL coat? and react with cold vulcanization glue SK313? thus it will tightly combine with the side of conveyor belt.

Ramimtech uncured intermediate rubber applying to conveyor belt hot splicing and conveyor belt hot repair ?Uncured intermediate rubber mainly used for fabric or steel cored these two kinds conveyor belt ? Fabric conveyor belt hot vulcanizing joint mainly use 0.8mm 1mm thickness uncured intermediate rubber and steel cored conveyor belt use 1mm?2mm?3mm?4mm?5mm uncured intermediate which can be choosed according to conveyor belt strength ?

Ramimtech repair strip take with cold vulcanization glue Sk313? can be used for repairing of conveyor belt longitudinal tear? part damage and scratching. Also can be used as seal handling of cold vulcanizing joints. It is easy operation? flexible? after repairing can be used immediately? which can fulfill the daily conveyor belt repair from Power Plant? Coal mine? Ports and ore industry and so on.

SK811 rubber belt adhesive with hardener after mixed? it‘s fit for bonding rubber to rubber?rubber to fabric and fabric to fabric.Specially it’s fit for bonding repair strip?diamond patch?cover repair rubber and pulley lagging rubber sheet which contains one ply of CN bongding layer.

Ramimtech repair strip applies unique industrial design? whose bonding area contains semi-cured layer? joints together with Sk313 cold vulcanization glue? which will realize super bonding strength to conveyor belt. The front part of repair strip is fabric reinforced surface? which can reduce the impact force of ore to the conveyor repair parts? ensure the abrasion resistance of repair parts.

Ramimtech cold vulcanizing glue SK313 applying to bonding rubber to rubber ? rubber to metal ? rubber to fabric? fabric to fabric. Cold vulcanizing glue SK313 is for cold jointing ?repairing and bonding of Nylon fabric and steel cored conveyor belt. also can be used in pulley lagging field ?

RAMIMTECH Conveyor belt adhesive SK811 RAMIMTECH Conveyor belt adhesive SK811 is widely used in various kinds of conveyor belt wounded and damage repairing. The features of this product is high bonding strength?quick?high efficiency?instant repairment and use. RAMIMTECH SK811 is the first choice for conveyor belt damage repair and pulley lagging. SK811 is special for bonding rubber to rubber?rubber to metal?rubber to fabric?fabric to fabric.

Ramimtech pulley lagging wear-resistant rubber sheet is made of high quality natural wear-resistant rubber and CN bonding layer ?mainly used in pulley laggingof conveyor belt drive drum?also can be used as rubber lining in materials handing field?storage silo and chute etc. Ramimtech pulley lagging wear-resistant rubber sheet is of special CN bonding layer which can bonding drum to rubber sheet fast and easily.

Ramimtech pulley lagging wear-resistant rubber sheet is made of high quality natural wear-resistant rubber and CN bonding layer ?mainly used in pulley laggingof conveyor belt drive drum?also can be used as rubber lining in materials handing field?storage silo and chute etc. Ramimtech pulley lagging wear-resistant rubber sheet is of special CN bonding layer which can bonding drum to rubber sheet fast and easily.

Using methord of repair strip CN bonding layer is on the back of the repair strip? cold vulcanizing bonding will occur while CN bonding layer meet cold vulcanizing adhesive SK313?and it will enhance the bonding strength.At the frontside of the repair strip?there contains one reinforced fabric layer. This layer can improve tensile?wear resistant?and heat resistant.

The best glue for bonding conveyor belt Which kind of glue is better for bonding conveyor belt? Before answering this question? we should consider the materials of conveyor belt? at present? conveyor belts can be divided into three kinds? fabric conveyor belt?nylon? canvas? polyester?? ST steel cord conveyor belt and PVG/PVC whole core fire retardant conveyor belt. Because of the differences of materials? the adhesives are different? thus we should clear the materia

RAMIMTECH-Pulley lagging materials? consist of wear resistant rubber sheet with CN bongding layer?clean solvent-SK353?matal primer-SK363 and cold vulcanizing adhesive-SK313.If use RAMIMTECH cold vulcanized bonding system?it will realize perfact bonding between wear resistant rubber sheet and the surface metal of roller.

Hot Vulcanization Glue SK823? which is a high performance vulcanization glue? applied in the area of Nylon? polyester? canvas and steel cord conveyor belt hot joints? whose excellent bonding strength that far more exceed Germany most strict DIN industrial standards? also can fulfill the application of Power? Coal? Mine and port plants.

Pulley lagging diamond rubber sheet RAMIMTECH-Pulley lagging diamond rubber sheet is made by anti-wear rubber.It‘s high tensile strength?super wear resistance?and can adapt to all kinds of extreme weather conditions.

Belt hot vulcanizing splice tie gum RAMIMTECH-Belt hot vulcanizing splice tie gum? is designed for conveyor belt hot vulcanizing and repair.Its special adhesion can ensure the quality of the hot splice. RAMIMTECH belt hot vulcanizing splice tie gum can achieve the superior bonding between rubber to steelcord?rubber to fabric and rubber to nylon? thus to get the best bonding performance.

Ramimtech repair strip can be divided into two kinds? one is reinforced repair strip with fabric ? the other is reinforced repair strip without fabric?they are all unite with SK313 through uncured layer and realize the cold vulcanizing repair to conveyor belt.

Cold bonding cement ??SK811 Cold bonding cement is used for conveyor belt cold spicing and cold repair.It could cure at ambient temperatur.The conveyor belt will be back to work in 20 minutes if the splice is done by cold vulcanizing.Especially cold splice is suitable for coal mine and explosion proof environments. ??

Uncured tie gum ??Ramimtech Uncured tie gum is suitable for all kinds of fabric? steelcord conveyer belt hot vulcanizing joint Brushing vulcanizing cement onto the surface of the Uncured tie gum when do hot vulcanizing?then use the top cover rubber to apply on the uncured tie gum. After been vulcanized The belt has excellent Ramimtech Uncured tie gum is suitable for all kinds of fabric? steelcord conveyer belt hot vulcanizing joint

Conveyor belt joint uncured cover rubber Conveyor Belt Joint Uncured Cover Rubber is also called cover Rubber.It's a kind of rubber for belt surface.cover rubber need to have tensile strength and better wear resistance(abrasion ?0.8cm3/1.61Km),ageing resistance, erosion resistance and high bonding strength.These are characteristics of the cover rubber.

hot vulcanizing materials for conveyor belt contains? uncured cover rubber?cover plate??intermediate rubber?core rubber?tie gum? and hot vulcanizing cement. ??They are used for making hot splice when conveyor belt was hurt seriously. ??1.Intermediate rubber?core rubber?tie gum? ??Specification? Width:500mm? thickness:1~3mm? Weight:10 Kg/Roll ?Features? 1?High bonding and tensile strength?no delamination from belt body?Impact resistance?

Cold splice cement for conveyor belt?cold curing glue?is a two-component cold curing glue.It is designed for bonding rubber and rubber?rubber and metal? rubber and fabric? fabric and fabric.

Cold bond repair rhombus Patch have two kinds of models:with fabric reinforced and without fabric. With import rubber as raw materials for the patch?The bonding surface of rhombus Patch have semi-cured design.With cold vulcanizing adhesive?splicer can use rhombus Patch to repai conveyor belt.Its operation is simple and won‘t take long time to repair. Rhombus Patch Fabric reinforced?V-Quality?Self-extinguish?Which offers a balance between an economical and durable repair for puncture

Cold bonding repair strip for conveyor belt repair ??Cold bonding repair strip for conveyor belt repair was designed with CN bonding layer?semi-cured layer?structure which greatly enhance the bonding adhesive between repair strip and conveyor belt. ??With unique fabric strengthening layer structure?it ensure the damage area of conveyor belt works well after repaired. The operation of Cold bonding repair strip is simple?with single person can independent operation.

Hot vulcanizing adhesive for conveyor belt splicing ??Hot vulcanizing adhesive is mainly used for conveyor belt hot vulcanizing joints.It can significantly improve the bonding strength of the hot splice. Enhance the bonding adhesion between uncured cover rubber and mother belt.Ensure the quality of the hot joints. ??Ramimtech Hot vulcanizing adhesive can be used in ply conveyor belt?steel cord conveyor belt. The steel wire of steel cord conveyor belt won‘t loose core after used

Fabric Belt Tie Gum ??Ramimtech Fabric Belt Tie Gum is suitable for hot vulcanizing of fabric ply conveyer belt and mainly used in the curing process of conveyor belt hot splice. ??Brushing hot vulcanizing cement onto the surface of the tie Gum during hot vulcanizing?then cover the uncured cover rubber. After vulcanized The fabric belt has excellent wear resistance?high tensile strength?impact resistance and tear resistance.

Uncured core rubber ??Efficient conveyor systems require heavy-duty wear protection. Our products are specifically placed at those parts of a conveyor belt system that are particularly prone to wear. ??RAMIMTECH Uncured core rubber was mainly used in the conveyor belt hot vulcanizing joints progress.Especially applicable for steel cord belt and fabric belt.After vulcanized by the vulcanizier?uncured core rubber and conveyor belt in one combined perfectly.

Henan Yinmeite Machinery Co.,Ltd not only to provide with quality conveyor belt maintenance products but also professional services for our customers.We have a professional on-site service team which provide conveyor belt cold splicing,conveyor belt hot vulcanizing joints,pulley lagging all the time.Our product have strong bonding adhesive,excellent wear-resistance.Ramimtech Cold splice Repair strips was your ideal choose for conveyor belt repair and maintence.

Hot Vulcanizing Solution is specially used for conveyor belt splicing joint. It‘s widely used in national energy and power plant. Hot vulcanizing solution can enhance the bonding strength of the splicing joint observably

??conveyor belt cold bonding glue ??conveyor belt Cold bonding glue?SK811?was a kind of two components adhesive which?is produced by RAMIMTECH.conveyor belt Cold bonding glue was design for bonding rubber to metal?rubber to rubber?fabric to metal.

Repair strip with fabric line. ??Repair strip with fabric line comes up when be compared with standard repair strip ??without fabric line. ??Because of its central part be added into fabric line? ??this kind of repair strip is with bigger tension strength and is more wear-resistant than standard repair strip ?

??steelcord belt splicing intermediate rubber ??hot splicing tie gum? conveyor belt splicing tie gum ??Henan Yinmeite Machinery Co.?Ltd.? which is a professional manufacturer of steelcord belt splicing intermediate rubber. It‘s mainly used on steelcord belt hot splicing? and the consumer is from the fields of intensive industry which need to use more conveyor belt? such as? power plant?cement?coal mine?ports and mixing station.

hot splice cement ??Usage of hot splice cement ??It‘s used when we make conveyor belt hot splicing joint.We need to apply it with the brush on the surface of uncured intermediate rubber?uncured cover stock and conveyor belt? so as en hence the adhesion strength of conveyor belt hot splicing joint. ??He n an Y in me i t e hot splice cement is fit for? Steel cord belt? nylon conveyor belt?fabric conveyor belt?Polyester belt.

Uncured cover rubber is designed for conveyor belt hot vulcanizing joint.After high temperature‘s vulcanizing?uncured cover ruuber begin to form top cover rubber and bottom cover rubber. ??Uncured cover rubber can be divided into common type and heat resistant type. ??Common type also called wear resistant type.The advantage of cover rubber is strong adhesion?aging resistance and abrasion resistance.

Rubber conveyor belt hot splicing materials is designed and manufactured by Henan Yinmeite Machinery co.?Ltd. ?Rubber conveyor belt hot splicing material-tie gum?intermediate rubber ??Features? 1.High bonding and tensile strength?no delamination from belt body?Impact resistance? tear resistance. 2.The steelcord is firmed and not easy to be pulled out from the belt body.

SK811 cold vulcanizing adhesive is a two component-adhesive for bonding rubber to rubber,rubber to metal,rubber to fabric,fabric to fabric. RAMIMTECH SK811 cold vulcanizing adhesive is used for repairing conveyor belt scratch,fabric ply belt cold jointing and pulley lagging. Cold vulcanizing adhesive SK811 can be used in conveyor belt cold splicing under any harsh environment.

Hot vulcanizing cement SK823 Hot vulcanizing cement SK823,which is one latest model of hot vulcanizing cement. Basing on the original technical,SK823 is made by introducing of advanced technology from Germany and USA. Through the test of conveyor belt hot vulcanizing,RAMIMTECH\'s engineer get the result, SK823\'s bonding strength exceed 9% compared with the previous product and the vulcanizing performance was significantly improved, Sk823 is high temperature resistant, water-tole