1.Electric Type This tunnel oven is composed of oven tunnel, mesh belt , belt driving system, chimney, electric heating pipes and control cabinet. The heater adopts infrared heating to make the biscuit baking equally. Frequency inverts control cabinet makes more accurate temperature controlling and wider temperate regulate range The oven is separate to several individual heating zones as per different formulas. Each Zone has can be regulated individually.

Gas Type 1)The machine is heated with gas(LPG or natural  gas).Rapid heating up and energy saving. 2)The oven is grouped into heat control zones. The top and bottom heat are independently adjustable and preset. The measured temperature and preset temperature will be displayed in digital form. 3)To allow independent movement of the chamber to relieve stresses when expanding or contracting. 4)High-quality thermal insulating material is used to get good insulation and efficient fuel usage.

In the wafer line, there are some trimming and wastage from the cutting process that needs to be reused in order to minimize the overall wastage of wafer baking system that is about 2%. This equipment is used to grind the discarded wafer in to a reusable form. The ground material can be used as additive cream depending on the requirement. The smashing or grinding machine is constructed out of SUS201 Stainless Steel material to maintain hygiene of the reusable products.

This is a SUS201 stainless steel mixer to prepare the cream for the production. It consists of a beater- type mixing unit. It is driven by one 4.5 Kw motor and the turnover system that removes the cream from the mixer is driven by one 0.55Kw motor. The mixing time is depending on the cream composition.

This is a SUS201 stainless steel mixer to prepare the cream for the production. It consists of a beater- type mixing unit. It is driven by one 4.5 Kw motor and the turnover system that removes the cream from the mixer is driven by one 0.55Kw motor. The mixing time is depending on the cream composition.

In the wafer line, there are some trimming and wastage from the cutting process that needs to be reused in order to minimize the overall wastage of wafer baking system that is about 2%. This equipment is used to grind the discarded wafer in to a reusable form. The ground material can be used as additive cream depending on the requirement. The smashing or grinding machine is constructed out of SUS201 Stainless Steel material to maintain hygiene of the reusable products.

This makes the batter for the system to produce the wafers. It will transfer the batter after mixed into the storage tub, and then transfer the batter by pump when the baking oven needs.

Cooling machine / cooling system For the cooling required for the wafer to cool. The performance of the cooling equipment is based on the the capacity of equipment,the type and weight of sandwichand and designed to meet the climatic conditions of the installation.The refrigeration unit uses Freon R22 as a refrigerant.

Cooling machine / cooling system For the cooling required for the wafer to cool. The performance of the cooling equipment is based on the the capacity of equipment,the type and weight of sandwichand and designed to meet the climatic conditions of the installation.The refrigeration unit uses Freon R22 as a refrigerant.

Cooling the cream sandwich to make it strong enough for cutting and packing,cooling the wafer to ensure a clean cut. The capacity of the wafer cooler depends on the performance of the equipment and the cooling time required for the product. The cooling time can be set between 15 and 25 minutes depending on the product. The room temperature is adjustable between 13-15ºC and the wafer is placed on the carrier of the conveyor and is cooled during passing through the cooling tower.

Cooling the cream sandwich to make it strong enough for cutting and packing,cooling the wafer to ensure a clean cut. The capacity of the wafer cooler depends on the performance of the equipment and the cooling time required for the product. The cooling time can be set between 15 and 25 minutes depending on the product. The room temperature is adjustable between 13-15ºC and the wafer is placed on the carrier of the conveyor and is cooled during passing through the cooling tower.

Adopting advanced technology with electric and gas as heating source, this full-auto wafer production line is a new generation product developed exclusively in China based on the advanced structure of existing plants from domestic market and abroad. If offers an ideal solution for lower power consumption and overall production cost, and keeping the same surface color for all biscuits.

SH Series Biscuit Production line is the primary choice for the production of kinds of hard and soft biscuit. The biscuit plant equipments can be combined and displayed according to customer’s local space or biscuit technical requirement.

Application:flat type wafer biscuit’ chocolate wafer Model: SH27/39/45/51/63/75 Capacity:2500/3500/4000/5000/6000 /7500kg/d Certificate: ISO,CE,BV,SGS

Model SH-27 SH-39 SH-45 SH-51 SH-63 Production Capacity(kg/h) 2500 3500 4000 5000 6000 Gas Oven Gas Consumption(kg/h) 18 25 25 32 40 Power(kw) 2.2 2.2 3.3 3.3 3.5 Electric Oven Installed Power(kw) 120 160 180 200 250 Electric Heating Plate Power(kw) 86 124 144 163 201 External Size(mm) 8330*1500*2500 8330*1500*2500 9470*1500*2500 10610*1500*2500 12890*1500*2500

Model SH-27 SH-39 SH-45 SH-51 SH-63 Production Capacity(kg/h) 2500 3500 4000 5000 6000 Gas Oven Gas Consumption(kg/h) 18 25 25 32 40 Power(kw) 2.2 2.2 3.3 3.3 3.5 Electric Oven Installed Power(kw) 120 160 180 200 250 Electric Heating Plate Power(kw) 86 124 144 163 201 External Size(mm) 8330*1500*2500 8330*1500*2500 9470*1500*2500 10610*1500*2500 12890*1500*2500

Application:flat type wafer biscuit’ chocolate wafer Model: SH27/39/45/51/63/75 Capacity:2500/3500/4000/5000/6000 /7500kg/d Certificate: ISO,CE,BV,SGS Adopting advanced technology with electric and gas as heating source, this full-auto wafer production line is a new generation product developed exclusively in China based on the advanced structure of existing plants from domestic market and abroad. If offers an ideal solution for lower power consumption and overall production cost, and keeping the same surface color for all biscuits.

Adopting advanced technology with electric and gas as heating source, this full-auto wafer production line is a new generation product developed exclusively in China based on the advanced structure of existing plants from domestic market and abroad. If offers an ideal solution for lower power consumption and overall production cost, and keeping the same surface color for all biscuits.

Adopting advanced technology with electric and gas as heating source, this full-auto wafer production line is a new generation product developed exclusively in China based on the advanced structure of existing plants from domestic market and abroad. If offers an ideal solution for lower power consumption and overall production cost, and keeping the same surface color for all biscuits.

The plant mainly consists of mixing system, automatic feeding system, tunnel-type oven, sheet feeding and cooling device, cream coating machine, cutter and organic heating medium boiler, etc. With compact structure and unique reliability, the plant is one of the most preferred equipment in food stuff industry.

The plant mainly consists of mixing system, automatic feeding system, tunnel-type oven, sheet feeding and cooling device, cream coating machine, cutter and organic heating medium boiler, etc. With compact structure and unique reliability, the plant is one of the most preferred equipment in food stuff industry.