Heavy duty bandsaw machine of safety foot brake. Sealed long life ball bearings. Precision ground cast iron rip fence. Large precision ground cast iron table. Magnetic control for overload protection. Excellent cutting power for wood or similar mater

The construction boring machine is constructed of single line horizontal boring unit. The boring unit can be changed from horizontal to vertical drilling by pneumatic setting. The boring unit can be tilted manually for angular drilling. Entire boring cycle can be fast and conveniently accomplished by pressing on the foot switch. Standard furnished with 21, 27 or 35 spindle boring head. Two fense provides convenient positioning of the workpiece.

Combined 2 sets of horizontal and 4 sets of vertical boring units in one machine. Simultaneous or individual operation for boring units not only upgrades working efficiency , but also save considerable production cost. The horizontal boring unit is equipped with 21 spindles X 2 boring heads with international standard 32 mm distance. The vertical boring unit is equipped with (11x2) x 4 or add them until (11x2) x 7 spindles boring heads with international standard 32 mm distance.

Suitable for industrial and small workshop use. Easy and safe for operation with high accuracy. Can fit with fixed or adjustable type multi-drill head. Small space occupied. Both bench and floor type machine available with versatility. With 45° graduation miter gauge for horizontal drilling in any angles. Drill bit and clamp derived by pneumatic operation.

Pneumatic operates to drill 15 or 21 holes at one time produce mass drilling capability. Precision large travel piston to insure accurate drilling position. Heavy duty cast iron frame for durability long period of use. Suitable and affordable for industrial and small workshop use. The machine is ruggedly constructed throughout and convenient operation and facilitated by the use of a foot switch control. Pneumatic drill head travel for fast and easy operate.