Leading Manufacturer and Exporter
Leading Manufacturer and Exporter
TEXMO HDPE Pipes are manufactured under strict quality control with latest technology conforming to IS-4984 and made as per IS-14333, ISO-4427 & Din 8074 specifications. TEXMO HDPE pipes are best preferred for potable water supply, irrigation schemes, chemicals and edibles transportation, effluent collection and disposal system, submarine and underwater pipe lines, hydro transport system, gas/compressed air system etc. TEXMO HDPE pipes have been preferred over other available resources due to varied salient features.
TEXMO HDPE Pipes are manufactured under strict quality control with latest technology conforming to IS-4984 and made as per IS-14333, ISO-4427 & Din 8074 specifications. TEXMO HDPE pipes are best preferred for potable water supply, irrigation schemes, chemicals and edibles transportation, effluent collection and disposal system, submarine and underwater pipe lines, hydro transport system, gas/compressed air system etc. TEXMO HDPE pipes have been preferred over other available resources due to varied salient features.
|
XMO PLB HDPE Duct & Micro Duct are manufacured as per norms of G.R.No. TEC/GR/TX/CDS - 008/03 MAR-11 & GR/MDS-01/01 Feb 2010 . It provides housing for fibre optic cable and metal cable, used as basic backbone in communication. TEXMO as a large processor of plastic material in India has introduced PVC, HDPE, Plain, Permanently Lubricated, Ribbed, Tracer & Large diameter ducts for safe placement of cables and future up gradation and replacement of damaged cables. TEXMO provides easy cable insertion and avoid damaging of cables due to its inner surface is very smooth. TEXMO believes in enhancing customer satisfaction and "TEXMO" brand ficilitate for safe placement of cables and future upgradation and easy replacement of damaged cables with a permanent conduit with permanent Lubrication. |
|
|
TEXMO sprinkler fittings are manufactured under strict quality control with latest moulding technology conforming to IS-14151:2008 Specifications. These fitting are produce to ensure the trouble free installation and functioning of sprinkler system.
TEXMO Casing Pipes are manufactured under strict quality control with latest technology As per IS-12818/2010 specifications, DIN: 4925 & ASTM-F480 Standards. TEXMO Casing Pipes proveds to be the most vital and long lasting for a tube well when these are properly selected and installed as per the site conditions, thus make a tube well dependable for longer period. In the past metal Casing of M.S. material in plain as well as in screen were the first choice of the customer for their tube wells but over the period of time, due to deterioration of the metal of the screen pipe, due to rusting/corrosion an there by formation of bacteria in the stagnant water and contamination of water source etc. material for casing pepes to replace the metallic ones. It has not only replace the metal pipes to PVC but also by way of the modifications, researches developed well consequently more discharge of water in the bore well. Thus TEXMO Casing Pipes are manufactured in different sizes and ranges to meet maximum site conditions and applications according to the need of the customer. These are manufactured as per the international standards after through checks by quality control laboratory in our factory. TEXMO Casing pipes are best prefered for tubewell, domestic wells, irrigation well, industrial wells and mines. TEXMO Casing control laboratory in ourfactory. TEXMO Casing pipes are best preferred for tubewell, domestic wells, irrigation wells, Industrial wells and mines. TEXMO Casing pipes have been preferred over other resources due to varied salient features.
TEXMO Pipes is the pioneer to design, develop and market UPVC Column Pipe that are being successfully used in the erection of submersible borewell pump set Up to Depth of 290 mtr. More thatn 400,000 successful installation have taken place across the India. TEXMO has a wire locking system of the pipe and coupler assembly, in which a wire is wound between the coupler and pipe to ensure that during installation and removal of pumps the joint does not open up, resulting in column slipping.
TEXMO Regid PVC pipes are manufactured under strict quality control with latest technology conforming to IS-4985/2000 specifications. TEXMO Rigid PVC pipes are best preferred for irrigation in agriculture farms, water supply, disposal of oils and chemical effluent & waste, acid slurries transportation, telecommunication cable ducting etc. TEXMO Rigid PVC pipes have been preferred over other available resources due to varied salient features.
TEXMO SWR pipes are manufactured under strict quality control with latest technology conforming to IS-13592 specifications. TEXMO SWR pipes & Fittings are best preferred for drainage system for homes, offices, hotels, commercial compexes, drain line in industries, chemical plants & power plants also for drainage systems at public places.
TEXMO moulded SWR fittings are manufactured under strict quality control with latest technology conforming to IS-14735 Specifications. TEXMO moulded SWR fittings are best preferred for drainage system for homes, offices, hotels, commercial complexes, drain lines in industries, chemical plants & power plants, also for drainage systems at public places. TEXMO moulded SWR fittings have been preferred over other available resources due to varied salient features.
|
TEXMO SOLVENT JOINT PLUMBING SYSTEM FOR COLD WATER General : Cold Water conveyance is the Plumbing system. Texmo Plumbing System is best suitable for conveyance of water upto temperature level of 600 C. This system was accepted and recommended by WHO in water application. RAW MATERIAL : Texmo Plumbing System comprises of pipes and fittings, made for PVC (Polyvinyl Chloride). The PVC compound contains specified quantity of chemical, stabilizer and other additives to facilitate better extrusion. PRODUCT SPECIFICATION : The system is made as per ASTM (American Society for testing of Materials) Standards. |
|||||||||||||||||
|
|||||||||||||||||
| TEXMO FITTING CAN BE CLASSIFIED INTO THREE CATEGOTIES NAMELY | |||||||||||||||||
|
TEXMO Rigid PVC pipes are best preferred for telecommunication cable ducting
|
TEXMO Drip Irrigation Systems are manufactured under strict quality control with latest technology conforming to IS-12786. IS-13488, in Laterals & IS-12785, IS-13487 in Fittings. TEXMO Drip Irrigation Systems are best preferred for efficient use of water, fertilizers and electricity in irrigation of a variety of crops like Banana, grapes and oranges etc. Also used gardens maintance. TEXMO Drip Irrigation Systems due to its quality the farmers, agriculturist & horticulturist have appreciated as well as accepted and they have yeilded profit by irrigating their fields as such the demand and popularity of TEXMO Drip Irrigation Systems is increasing day by day. By TEXMO Drip Irrigation Systems each plant get water drop by drop near the roots slowly & continuously due to which the soil of the plant always remains wet and moist. By adopting TEXMO Drip Irrigation Systems the fertilizers are mixed with water & provided drop to the roots of the plant which will be most effective for healthy growth of the plant and also saves fertilizers, water and time.
TEXMO L.D. (Krishi) Pipe are manufactured under strict quality control with latest technology. TEXMO L.D. (Krishi) Pipe are manufactured by Linear Low Density Poly-ethylene (Virgin) Material. On TEXMO L.D. (Krishi) Pipe no effect of high temperature like desert area as well as no effect of clod temperature like Himalayas. TEXMO L.D. (Krishi) Pipe have been preferred over other available resources due to varied salient features.
TEXMO Solvent Cement are manufactured under strict quality control with latest technology as per ASTMD- 2564 specification. TEXMO Solvent Cement is a colourless solution used for joining RPVC pipes and Fittings. It is produced by dissloving suspension grade PVC resin, with a suitable K-value, in ketonic solvents. The products is flammable and hence should not be kept under direct sunlight or in abnormal ambient temperatures.
Business Type : Manufacturers
Year of Estd. : 1999
Company Turnover :
No. of Employees : 900 - 950
