Natural Bitumen Asphalt Grade: Gilsonite Asphalt Grade deposited in Gilane Gharb, Iran have been known since 1940 and it is the only mineral Asphalt Grade deposits area in Iran. The deposits contain 80 to 97 % asphalt content and there is reserved between 200 to 300 million tons of natural Bitumen. It has been used mainly for road construction and maintenance however oil well drilling fluid to prevent lost circulation. sales3@minepars.com 00989901177392

Powder Gilsonite Asphalt Grade: This invention directed to asphalt cement formula, formed from petroleum asphalt, natural asphalt, reactive oil and elastomer. Elastomer has gel content (+95%) sales3@minepars.com Whats app: 00989901177392

Asphalt cement toughened with powder gilsonite and thinned with reactive oil. Reactive oil is an oil that contains a high content of unsaturated fatty acids. By using a reactive oil, it would cure or react after usage of asphalt cement to highway. Thereby allowing for a lower viscosity uses by curing later to prevent rutting. sales3@minepars.com Whats app: 00989901177392

A highly pure natural bitumen is known as Gilsonite Industrial grade. It used to make asphalt floor tiles, storage battery boxes, paints, black varnishes. Also used in hot underground piping, waterproof coatings, wire insulation, linoleum and floor tiles, paving, low grade rubber compounds, dark photogravure inks, solvent-free seam sealers in automobiles. Furthermore, it uses in oil-drilling, foundry, explosive, and nuclear graphite industries.

Drilling Fluid Grade: Drilling Fluid Grade (FLC) – An important characteristic of Gilsonite is its softening-point temperature. In oil-base muds. It use as fluid-loss control agent because it`s hydrocarbon properties. It`s naturally wetted by oil. In water-base mud, it is used as a shale-stabilizing additive and is difficult to evaluate unless tested at or above its softening point. As a hydrocarbon, powder must be coupled to water by using a glycol or similar water-wetter. sales3@minepars.com

Remove cuttings from the well. Control formation pressure. Suspend and release cuttings. Suspend and release cuttings. Seal permeable formations. Maintain wellbore stability. Minimize reservoir damage. Cool, lubricate, and support the bit and drilling assembly. Transmit hydraulic energy to tools and bit. Ensure adequate formation evaluation. Control corrosion Facilitate cementing and completion. Minimize impact on the environment. Prevent gas hydrate formation.

Gilsonite (uintaite), Glance Pitch and Graliamite are natural occurring hydrocarbon substances characterized by a high softening point (above 110° C) in the class known as asphaltite. They are mined much like other minerals and sold essentially in their native state. sales3@minepars.com

Gilsonite’ s benefits to asphalt pavements include increased stability, resistance to deformations problems such as rutting and shoving, resistance to water striping and increased load bearing ability. Gilsonite functions by making the pavements harder, stronger and increases asphalt’s adhesion to aggregates. sales3@minepars.com

It is generally regarded that Gilsonite reduces pavements’ low temperature properties making them susceptible to thermal cracking. Gilsonite melted into hot asphalt will reduce penetration and increase viscosity of the asphalt binder. Gilsonite may also be mixed with aggregate prior to combining with the asphalt binder. sales3@minepars.com

It is generally regarded that Gilsonite reduces pavements’ low temperature properties making them susceptible to thermal cracking. Gilsonite melted into hot asphalt will reduce penetration and increase viscosity of the asphalt binder. Gilsonite may also be mixed with aggregate prior to combining with the asphalt binder. sales3@minepars.com

The use of thin priming oils has been proposed where fines and/or sand are present but as the thin priming oil is a very rapid solvent for the powdered asphalt which is added, the mixture thickens almost immediately to a point where it cannot be stored, trans-shipped and laid.

The invention relates to a composition comprising an HPHT fluid loss control aid, stable at elevated temperatures and which also acts as an excellent shale stabilizer, bore hold lubricant, sealant for depleted sand, and wall cake conditioner. The HPHT fluid loss control aid broadly comprises a Gilsonite (asphaltite, asfaltit,Gilsonita,uintaite, natural asphalt, natural bitumen) which also contains a surfactant such as a nonionic surfactant.

To achieve these and other advantages, and in accordance with the purpose of the invention, as embodied and broadly described, the invention comprises a composition comprising an HPHT fluid loss control aid stable at elevated temperatures, and which also acts as an excellent shale stabilizer, bore hole lubricant sealant for depleted sands, and wall cake conditioner.

The HPHT fluid loss control aid broadly comprises Gilsonite, an asphaltic material or solidified hydrocarbon produced by PUB Gilsonite Company in Iran. The Gilsonite employed according to the present invention also contains a surfactant, especially, a nonionic surfactant.

The use of thin priming oils has been proposed where fines and/or sand are present but as the thin priming oil is a very rapid solvent for the powdered asphalt which is added, the mixture thickens almost immediately to a point where it cannot be stored, trans-shipped and laid. sales3@minepars.com

This process, therefore, requires a very fine balance between the two products in regard to solvent power and very often results in mixtures that do not completely amalgamate as it is very difficult to maintain a substantial coating of the thin priming oil on the crushed stone aggregate due to its tendency to flow. sales3@minepars.com

The use of thin priming oils has been proposed where fines and/or sand are present but as the thin priming oil is a very rapid solvent for the powdered asphalt which is added, the mixture thickens almost immediately to a point where it cannot be stored, trans-shipped and laid. sales3@minepars.com

This process, therefore, requires a very fine balance between the two products in regard to solvent power and very often results in mixtures that do not completely amalgamate as it is very difficult to maintain a substantial coating of the thin priming oil on the crushed stone aggregate due to its tendency to flow. sales3@minepars.com

An object of this invention is to provide a process of producing bituminous paving materials containing the required amounts of mineral aggregate, priming oil and asphalt which may be prepared in its entirety at one central plant. sales3@minepars.com

Other objects of the invention are as follows: To provide a process of producing asphaltic paving material which will allow mixing easily and will be mobile during spreading. To provide a process of manufacturing bituminous paving materials in the cold, that is, at atmospheric temperatures. sales3@minepars.com

Gilsonite is black and natural rock asphalt that can be pulverized and melted to use in the ink, drilling fluid, asphalt and foundry industry. Gilsonite chemical makeup is a complex mix of elements that include sulfur, carbon, oxygen, hydrogen and nitrogen, as well as small quantities of other elements.

There are several different types and ranks of Gilsonite. Natural asphalt is classified by degrees of hardness, moisture and softening point. Gilsonite is hard petroleum, almost hydrocarbon, and containing the highest fuel content.

Bituminous rock is a type of Gilsonite , the most common type in Iran, used to mix with oil base products to modify bitumen and to make high quality bitumen for high way and Airports also special Iran Gilsonite using for fluid lose control and stabilizing hole shale.

To determine the origins of Gilsonite, one has to look back a long way. Some 300 million years ago, much of Iranian was a swamp covered with giant ferns, reeds and other animals. When the existence died, they fell under water, where the oxygen was not sufficient for them to decay completely. A result was the formation of peat.

Gilsonite is widely used as the primary carbon black wetting agent for black news inks and headset and toner inks. PUB Gilsonite Resin competes advantageously with hydrocarbon resins, phenolic resins.

In the formulation of the cementing composition of the invention, it is preferable to employ gilsonite in an amount ranging from approximately one-half to approximately ten times by volume the amount of the cement utilized, depending upon the particular result desired. The lower range is employed where maximum strength is important; the higher range where the various qualities imparted by the gilsonite are most important.

A cement produced by Gilsonite is suitable for blocking or plugging an abandoned pipeline or back filling a mine shaft, tunnel or excavations contains Portland cement or a mixture of at least two components selected from Portland cement, A cementitious slurry, formulated from the cement mix, may have a density less than or equal to 1500 kg/m3, and exhibits good compressive strength.

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt.

Gilsonite, an additive for foundry sand preblends providing reduced smoke and other emissions, the additive comprising a mixture of one part iron oxide as one part of a highly volatile carbonaceous material, and four parts of metallurgical coke. sales3@minepars.com

These compositions produce superior Gilsonite cement that can give low viscosity during application followed by high viscosity, toughness and tenacity after curing on the highway. sales3@minepars.com

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt. sales3@minepars.com

Gilsonite is a naturally occurring asphaltite, having specific gravity substantially equivalent to that of water. sales3@minepars.com

To provide a process of producing asphaltic paving material which will allow mixing easily and will be mobile during spreading. To provide a process of manufacturing bituminous paving materials in the cold, that is, at atmospheric temperatures. sales3@minepars.com

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt. sales3@minepars.com

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt. sales3@minepars.com

Gilsonite cement compositions are disclosed which utilize petroleum asphalt, natural asphalt, a reactive oil and an elastomer. These compositions produce superior Gilsonite cement that can give low viscosity during application followed by high viscosity, toughness and tenacity after curing on the highway. sales3@minepars.com

Gilsonite Industrial Gilsonite application in industrial sector consist of, paint, Ink, coat, asphalt, Foundry and construction.

A paint consisting essentially of 20 gallons of petroleum solvent, 10 gallons of linseed oil, 10 gallons turpentine, pounds ofGilsonite pigment, 4 gallons varnish mixture consisting of 17.8% pentaerythritol rosin ester, 30.8% dehydrated castor oil, 1.4% of a mixture of lead, cobalt and manganese naphthenates, 1 gallon wetting agent consisting essentially of salts of petroleum sulfonic acids, 2 quarts of drier, and 1 pint of a hydrocarbon silicon penetrating oil.

Gilsonite is widely used as the primary carbon black wetting agent for black news inks and headset and toner inks. PUB Gilsonite Resin competes advantageously with hydrocarbon resins, phenolic resins.

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt.

We discovered that a synthetic flux oil can contain and deliver asphaltites, such as gilsonite, more easily and readily to an asphalt to improve its properties. The synthetic flux oil includes the asphaltite and a carrier oil. Depending on the nature of the carrier oil, the synthetic flux oil may or may not need to be heated during mixing and incorporation into the asphalt.

Gilsonite is black and natural rock asphalt that can be pulverized and melted to use in the ink, drilling fluid, asphalt and foundry industry. Gilsonite chemical makeup is a complex mix of elements that include sulfur, carbon, oxygen, hydrogen and nitrogen, as well as small quantities of other elements.

There are several different types and ranks of Gilsonite. Natural asphalt is classified by degrees of hardness, moisture and softening point. Gilsonite is hard petroleum, almost hydrocarbon, and containing the highest fuel content. Bituminous rock is a type of Gilsonite , used to mix with oil base products to modify bitumen and to make high quality bitumen for high way and Airports also special Iran Gilsonite using for fluid lose control and stabilizing hole shale.

Gilsonite (uintaite), Glance Pitch and Graliamite are natural occurring hydrocarbon substances characterized by a high softening point (above 110° C) in the class known as asphaltite. They are mined much like other minerals and sold essentially in their native state.

Asphalt has been the subject of exhaustive study to improve characteristics for use in paving. Various properties of asphalt are manipulated to produce a product that has the appropriate wear properties, rut resistance, fatigue and low temperature cracking resistance, adhesion strength, viscosity and pour point.